Section 10-7500 Website

 

Admiral Flag Poles, Inc.

5795 Westbourne Ave.

Columbus, OH 43213

Phone: (800) 783-7653

Fax: (800) 830-6233

Site Navigation

Home
Flag Poles 101
Flag Pole Grades
Wind Speed Chart
Drawings/Specs
Owner Documents
Glossary
Site Map
Retail Site

 

 

 

 

 

 

 

  

          

 

 

 

 

 

 

Architectural/Commercial Grade Flag Poles

 

 

Admiral's Architectural/Commercial Grade flag poles are manufactured from all new, seamless 6063 aluminum alloy tubing, heat treated to a T6 temper. All flag poles are designed to withstand a minimum wind speed of 100 MPH.

 

 

 

 

 

 

The standard finish is an 80 grit satin brushed with Anodized and Powder Coated finishes available as an option. Minimum wall thickness is .188, except for poles 60' and larger. Each flag pole tapers from 50 of the total length and is shipped in a hard fiber tube.

Standard Fittings

Ball Ornament: 6" diameter, manufactured from 14 gauge spun aluminum, gold anodized with a tight lap joint.

Truck: Cast aluminum, non-fouling revolving type with stainless steel bearings and 2 cast aluminum sheaves mounted on stainless steel pins. 

Cleat: 9" Cast aluminum attached to the flag pole with stainless steel fasteners.

Halyard: 5/16" Braided nylon equipped with cast bronze swivel snaps.

Foundation Tube: 16 gauge corrugated steel with lighting rod and support plate.

Optional Accessories

Eagle Ornaments

Cleat Covers

Base Collar

Internal Halyard Systems

Custom Finishes

Specifications

Exposed Height Overall Length Butt Diameter Top Diameter Wall Thickness Ball Diameter
20' 22' 5" 3" .188 6"
25' 26' 6" 5" 3" .188 6"
30' 33' 6" 3" .188 6"
35' 38' 6" 7" 3.5" .188 6"
40' 44' 8" 3.5" .188 8"
45' 49' 8" 3.5" .188 8"
50' 55' 10" 4" .188 8"
60' 65' 10" 4" .250 8"
70' 77' 12" 4" .250 10"
80' 88' 12" 4" .375 10"

 

 

©2007 Admiral® Flag Poles, Inc., All Rights Reserved.