|
Section 10-7500 Website
Admiral Flag Poles, Inc. 5795 Westbourne Ave. Columbus, OH 43213 Phone: (800) 783-7653 Fax: (800) 830-6233 |
|||||||||||||||||||||||||||||||||||||
|
Site Navigation
|
Medium Duty Grade Flag Poles
As a spin off of the commercial tapered aluminum flag poles, Admiral's Medium Duty flag poles are designed using 6063 aluminum alloy heat treated to a T6 temper. Medium Duty grade flag pole are designed for locations that experience normal wind loads, but require a heavier shaft than the Light Commercial Grade flag poles.
The standard finish is an 80 grit satin brushed with Anodized and Powder Coated finishes available as an option. Minimum wall thickness is .156, except for poles 35' and larger. Each flag pole tapers from 50 of the total length and is shipped in a hard fiber tube. Standard Fittings Ball Ornament: 6" diameter, manufactured from 14 gauge spun aluminum, gold anodized with a tight lap joint. Truck: Cast aluminum, non-fouling revolving type with stainless steel bearings and 2 cast aluminum sheaves mounted on stainless steel pins. Cleat: 9" Cast aluminum attached to the flag pole with stainless steel fasteners. Halyard: 5/16" Braided nylon equipped with cast bronze swivel snaps. Foundation Tube: 16 gauge corrugated steel with lighting rod and support plate. Optional Accessories Eagle Ornaments Cleat Covers Base Collar Internal Halyard Systems Custom Finishes Specifications
|
||||||||||||||||||||||||||||||||||||
