Residential Flag Poles | Commercial Flag Poles | Fiberglass Flag Pole | American Flags | State Flags

 
    VIEW CART  

Home
Outdoor Flag Poles
Residential Flag Poles
Commercial Flag Poles
Fiberglass Flag Poles
Nautical Flag Poles
Internal Halyard
Indoor Flags & Poles
Flag Pole Parts
American Flags
Flags
Flag Cases
Weathervanes

We Accept Purchase Order Requests from School Districts, Federal, State and Local Governments.

Call us at

 1-800-783-7653

 

 

40' MEDIUM DUTY COMMERCIAL FLAG POLES

TAPERED ALUMINUM - EXTERNAL HALYARD

 

 

Our Medium Duty Commercial Grade flag poles are designed for use in commercial applications that require the use of a larger flag pole and heavier wall thickness than our Light Commercial Grade. These flag poles are fabricated from all new seamless 6063 aluminum alloy tubing and heat treated to a T6 temper and completed with an 80 grit satin finish.

 

The flag poles components are manufactured from aluminum using stainless steel hardware and fasteners to prevent rust and corrosion allowing for years of trouble free service with very little maintenance. The Medium Duty Commercial Grade flag poles are also provided with solid braided nylon halyard, chrome plated cast bronze snaps with vinyl snap covers.

 

These flag poles are installed using a steel foundation tube which includes lightning spike and support plate and considered to be a permanent installation.


 

 
 

 

FLAG POLE SPECIFICATIONS

 

EXPOSED

HEIGHT

OVERALL

LENGTH

BUTT

DIAMETER

TOP

DIAMETER

WALL

THICKNESS

SHAFT

SECTIONS

SHIPPING

WEIGHT

40'44'8"4".1562277lbs.
Recommended Flag Size and Wind Speed Rating Information

Rated Flag Size: 6' x 10'*

*Larger flag sizes may be used depending on your local wind region.

Wind Speed Rating without a Flag: 172 mph

Wind Speed Rating with Recommended Flag Size: 117 mph


 

STANDARD ACCESSORIES

 

FINIAL: 6" Gold Ball constructed from 14 gauge spun aluminum with a gold anodized and a tight lap joint. 
TRUCK: Cast aluminum double pulley revolving truck unit with aluminum pulleys mounted on a stainless steel pins.  
HALYARD: 5/16" Braided Nylon Halyard with 2 included chrome plated cast bronze snaps and vinyl snap covers that allow for one flag. 
CLEAT: 9" cast aluminum cleat with stainless steel fasteners.  
BASE COLLAR: Constructed from light gauge spun aluminum and finished to match flag poles finish. Base collars protect the sand that is used to hold the flag pole in the foundation tube from washing away.  
GROUND SLEEVE: Corrugated steel with support plate and lightning rod.  
FINISH: Standard finish is an 80 grit brushed satin.  

 

 

 


 
Admiral Flag Poles, Inc. | 5795 Westbourne Ave. | Columbus, OH 43213
Phone: (800) 783-7653 | Monday - Friday 8am - 5pm EST
Copyright 2011. Admiral Flag Poles, Inc. All rights reserved.