Stationary Cap Style unit used on Cam Cleat and V Cleat flag poles. Fits flag pole shafts 2 in. in diameter. Cast aluminum with aluminum pulley. Attaches using 3 stainless steel set screws and tapped for 1/2 - 13NC finial. Made in the USA. Painted to match all finishes except satin.
Stationary Cap Style unit used on Cam Cleat and V Cleat flag poles. Fits flag pole shafts 2.5 in. in diameter. Cast aluminum with aluminum pulley. Attaches using 3 stainless steel set screws and tapped for 1/2 - 13NC or 5/8 X 11NC finial. Made in the USA. Painted to match all finishes except satin.
Stationary Cap Style unit used on Cam Cleat and V Cleat flag poles. Fits flag pole shafts 3 in. in diameter. Cast aluminum with aluminum pulley. Attaches using 3 stainless steel set screws and tapped for 1/2 X 13 or 5/8 X 11NC finial. Made in the USA. Painted to match all finishes except satin.
Stationary Cap Style unit used on Cam Cleat and V Cleat flag poles. Fits flag pole shafts 3.5 in. in diameter. Cast aluminum with aluminum pulley. Attaches using 3 stainless steel set screws and tapped for 1/2 X 13NC or 5/8 X 11NC finial. Made in the USA. Painted to match all finishes except satin.
Internal Halyard Revolving Truck used on all internal halyard systems with revolving truck. Fits flag pole shafts with 1-1/4 in. pipe threads and tapped for 1/2 x 13NC or 5/8 X 11NC finial. Recommended on flag poles up to 30 ft. Made in the USA. Painted to match all finishes except satin.
Internal Halyard Revolving Truck used on all internal halyard systems with revolving truck. Fits flag pole shafts with 1-1/4 in. pipe threads and tapped for 1/2 X 13NC or 5/8 X 11NC finial. Recommended on flag poles larger than 30 ft. Made in the USA. Painted to match all finishes except satin.
Heavy Duty Internal Halyard Revolving Truck used on all internal halyard systems with revolving truck. Fits flag pole shafts with 1-1/4 in. pipe threads and tapped for finial. Recommended on flag poles 60 ft. and larger. Made in the USA. Painted to match all finishes except satin.
XL Heavy Duty Internal Halyard Revolving Truck used on all internal halyard systems with revolving truck. Fits flag pole shafts with 1-1/4 in. pipe threads and tapped for finial. Recommended on flag poles 60 ft. and larger. Made in the USA. Painted to match all finishes except satin.
Internal Halyard Ball Trucks are construsted from aluminum with sealed upper and lower bearings. Cast brass exit bushing reduces wear and increases truck life. Fits flag pole shafts with 1-1/4 in. pipe threads and a maximum top diameter of 3-1/2". Powder Coated Gold Finish. Made in the USA.
Internal Halyard Ball Trucks are construsted from aluminum with sealed upper and lower bearings. Cast brass exit bushing reduces wear and increases truck life. Fits flag pole shafts with 1-1/4 in. pipe threads and tapped for 1/2 X 13NC. Powder Coated Gold Finish. Made in the USA.
Internal Halyard Ball Trucks are construsted from aluminum with sealed upper and lower bearings. Cast brass exit bushing reduces wear and increases truck life. Fits flag pole shafts with 1-1/4 in. pipe threads and a maximum top diameter of 3-1/2 inches. Powder Coated Gold Finish. Made in the USA.
Internal Halyard Ball Trucks are construsted from aluminum with sealed upper and lower bearings. Cast brass exit bushing reduces wear and increases truck life. Fits flag pole shafts with 1-1/4 in. pipe threads and a maximum diameter of 7-1/2 inches. Powder Coated Gold Finish. Made in the USA.
Internal Halyard Ball Trucks are construsted from aluminum with sealed upper and lower bearings. Cast brass exit bushing reduces wear and increases truck life. Fits flag pole shafts with 1-1/4 in. pipe threads with a maximum diameter of 7-1/2 inches. Powder Coated Gold Finish. Made in the USA.
